Title | Author | Reply/View | Last replied |
Digole color LCD 168x128 1.8" via I2C mode problem | Sorathiya 2020-11-03 | 1 / 785 | 2021-03-03 08:16:54 by Sorathiya |
I tried the digole-emu.php, problems... | EEK 2020-08-05 | 1 / 1180 | 2020-12-03 12:56:17 by Service |
Touch Screen troubleshooting; I2C Teensy 3.2; 2.6" Color LCD 320x240 | bjw1220 2020-06-09 | 1 / 1008 | 2020-10-08 21:24:20 by Service |
No Visible Text for Teensy 3.2 I2C for RG1602A display and Adapter | bjw1220 2020-06-05 | 2 / 1101 | 2020-10-07 21:45:13 by bjw1220 |
Raspberry Pi SPI | gilphilbert 2020-05-28 | 1 / 1203 | 2020-09-25 18:01:35 by Service |
DS12864OLED-3W display: SS input high or low in I2C mode? | pip621114 2020-05-23 | 1 / 1240 | 2020-09-25 17:57:34 by Service |
2.6 "320x240 LCD touchscreen returning wrong pixel coordinates | janjor 2020-05-01 | 8 / 1405 | 2020-09-01 13:44:26 by Service |
Max. SPI speed for LCD? | o_lampe 2018-06-11 | 6 / 2516 | 2020-07-08 17:59:48 by VerlaHiltz |
How to get maximum performance (refresh rate)? | ivs 2020-02-07 | 1 / 1264 | 2020-06-18 14:10:43 by Service |
Create a rolling "oscilloscope" display | peekay123 2019-11-29 | 0 / 1360 | |
1.8" v4 brightness. | M5TXJ 2019-06-03 | 2 / 1647 | 2019-10-01 14:49:33 by M5TXJ |
penirq + RPNXYI --> endless loop? | IamArobot 2019-05-16 | 9 / 1824 | 2019-09-17 12:54:54 by Service |
Can the firmware get damged during normal use? | IamArobot 2019-05-20 | 1 / 1673 | 2019-09-17 12:51:17 by Service |
demands on start screen image | IamArobot 2019-05-06 | 9 / 1709 | 2019-09-05 20:36:52 by Service |
How to use EEPROM ? | Jacek 2019-04-22 | 9 / 1738 | 2019-08-25 11:54:05 by Service |
Text string length, strange limitation | Jacek 2019-04-14 | 7 / 1609 | 2019-08-22 16:23:54 by Service |
Touch commands vs. other commands | Jacek 2019-04-16 | 4 / 1772 | 2019-08-21 14:53:05 by Jacek |
SPI command | madcookie 2019-04-16 | 5 / 1687 | 2019-08-20 13:05:38 by Service |